User manual

Symbologies 6 - 85
Data Matrix Inverse
Parameter # 588
This parameter sets the Data Matrix inverse decoder setting. Options are:
• Regular Only - the imager decodes regular Data Matrix bar codes only.
• Inverse Only - the imager decodes inverse Data Matrix bar codes only.
• Inverse Autodetect - the imager decodes both regular and inverse Data Matrix bar codes.
Maxicode
Parameter # 294
To enable or disable Maxicode, scan the appropriate bar code below.
Regular
(0)
Inverse Only
(1)
*Inverse Autodetect
(2)
Enable Maxicode
(1)
*Disable Maxicode
(0)