User manual

4 - 16 DS4800 Series Corded Digital Imager Product Reference Guide
Haptic Feedback (Vibrate) on Trigger Touch
Parameter # 1251
The imager provides haptic feedback which, when enabled, vibrates the imager upon a trigger touch.
Scan a bar code below to enable or disable this feature.
Tone on Trigger Touch
Parameter # 1252
Scan a bar code below to enable or disable a tone upon a trigger touch.
*Enable Haptic Feedback (Vibrate) on Trigger Touch
(1)
Disable Haptic Feedback (Vibrate) on Trigger Touch
(0)
NOTE To ensure the aiming dot appears during scanning, disable this feature if you enabled Picklist Mode on
page 4-20 or Hand-Held Decode Aiming Pattern on page 4-18.
*Disable Tone on Trigger Touch
(0)
Enable Tone on Trigger Touch
(1)