User manual

2 - 2 DS4800 Series Corded Digital Imager Product Reference Guide
Image Capture
Snapshot mode started. Low tone Green blinking None
Snapshot mode completed. Low tone Green (default based on
hand-held (picklist) /
hands-free)
None
Snapshot mode timed-out. High, low tone Green (default based on
hand-held (picklist) /
hands-free)
None
Parameter Programming
Input error: incorrect bar code,
programming sequence, or Cancel
bar code scanned.
Low, high tone Red for 2 seconds None
Number expected. Enter value using
numeric bar codes.
High, low tone Green None
Successful program exit with change
in parameter setting.
High, low, high, low
tone
Green for 1 second None
ADF Programming
Enter another digit. Add leading zeros
to the front if necessary.
High, low tone Green None
Enter another alphabetic character or
scan the End of Message bar code.
Low, low tone Green None
ADF criteria or action is expected.
Enter another criterion or action, or
scan the Save Rule bar code.
High, high tone Green Blinking None
Rule saved. Rule entry mode exited. High, low, high, low
tone
Green (turns off blinking) None
All criteria or actions cleared for
current rule, continue entering rule.
High, low, low tone Green None
Delete last saved rule. The current
rule is left intact.
Low tone Green None
All rules are deleted. Low, high, high tone Green None
Out of rule memory. Erase some
existing rules, then try to save rule
again
Low, high, low, high
tone
Red None
Cancel rule entry. Rule entry mode
exited because of an error or the user
asked to exit rule entry.
Low, high, low tone Green (turns off blinking) None
Table 2-1 Default User Feedback Definitions (Continued)
Indication Speaker Sequence Indicator LED
Haptic/
Vibration