User manual

CHAPTER 2 DATA CAPTURE
Introduction
This chapter provides speaker and LED definitions, general scanning instructions and tips, and decode range
information.
User Feedback Definitions
The imager uses a 2-color indicator LED, a white trigger LED, various beep sequences, and a vibrator motor to
indicate status. Table 2-1 defines the default beep sequences, LED displays, and vibration patterns that occur
during both normal scanning and while programming the imager.
Table 2-1 Default User Feedback Definitions
Indication Speaker Sequence Indicator LED
Haptic/
Vibration
Standard Use
Power up. Power up tone Green, then fades out Double-
vibrate
Ready to scan (hand-held mode). None None None
Ready to scan
(hands-free/presentation mode).
None Pulsing green None
The trigger was touched. None None Vibrate for
100 ms
A bar code was decoded. Wood block / scan
tone 1
Green for 100 ms None
Transmission error. 4 long low tones Red None
Conversion or format error. 5 low tones Red None