User manual

Intelligent Document Capture 7 - 9
IDC Aspect
Parameter Name: DocCap_ASPECT
Parameter # 595
Specify the bar code's aspect ratio of a thin bar or space. The bar code's height is divided by this value to get
the unit in the y-axis. The aspect value is calculated automatically if this parameter is set to zero.
This parameter only applies when IDC Operating Mode is set to Anchored.
Scan the bar code below, followed by three bar codes from Appendix G, Numeric Bar Codes in the range of
000 to 255. The default is 000.
IDC File Format Selector
Parameter Name: DocCap_FMT
Parameter # 601
Select a document capture file format appropriate for your system (BMP, TIFF, or JPEG). The decoder stores
captured areas in the selected format.
IDC Aspect
*JPEG
(1)
BMP
(3)
TIFF
(4)