User manual

6 - 2 DS4800 Series Corded Digital Imager Product Reference Guide
Errors While Scanning
Unless otherwise specified, to correct an error during a scanning sequence, just re-scan the correct parameter.
Symbology Parameter Defaults
Table 6-1 lists the defaults for all symbology parameters. To change the default values, scan the appropriate
bar codes in this guide. These new values replace the standard default values in memory. To recall the default
parameter values, see Default Parameters on page 4-5.
NOTE See Appendix A, Standard Default Parameters for all user preferences, hosts, and miscellaneous default
parameters.
Table 6-1 Symbology Parameter Defaults
Parameter
Parameter
Number
Default
Page
Number
Enable/Disable All Code Types 6-7
1D Symbologies
UPC/EAN
UPC-A 1 Enable 6-8
UPC-E 2 Enable 6-8
UPC-E1 12 Disable 6-9
EAN-8/JAN 8 4 Enable 6-9
EAN-13/JAN 13 3 Enable 6-10
Bookland EAN 83 Disable 6-10
Bookland ISBN Format 576 ISBN-10 6-11
Decode UPC/EAN/JAN Supplementals (2 and 5 digits) 16 Ignore 6-13
User-Programmable Supplementals
Supplemental 1:
Supplemental 2:
579
580
000
6-15
UPC/EAN/JAN Supplemental Redundancy 80 10 6-15
Decode UPC/EAN/JAN Supplemental AIM ID 672 Combined 6-16
Transmit UPC-A Check Digit 40 Enable 6-17
Transmit UPC-E Check Digit 41 Enable 6-17
Transmit UPC-E1 Check Digit 42 Enable 6-18
UPC-A Preamble 34 System Character 6-19
UPC-E Preamble 35 System Character 6-19