manual

4 DS457 Fixed Mount Imager
Connecting the DS457
To connect the DS457 to a host:
1. Plug the 9-pin D-connector with the end
marked SCANNER into the DS457.
2. If using an external switch and applicable host
cable, plug the trigger cable into the female
stereo connector on the flying lead of the 9-
pin D-connector.
3. Plug the host side connector into the
appropriate port on the host.
4. For RS-232 connection, plug the power supply
into an AC receptacle, and the output cable
from the power supply into the connector near
the host end of the interface cable.
5. Check all connections to ensure they are
secure.
6. Program the DS457 using the programming
bar codes in the DS457 Imager Integration
Guide.