Users Manual

1
7
4
5
3
2
6
8
10
11
12
13
14
15
Replace Illustration
STEP 1 - CONNECT HOST INTERFACE
SCANNER FEATURES
See Product Reference Guide
for detailed information
NOTE: Cables may vary depending on configuration
STEP 2 - SET UP INTERFACE (Scan Host Bar Codes)
1 Scan Window
2
3 Ambient Light Sensor
4 Scan Trigger
USB
Keyboard Wedge
USB
Scan ONE of the bar codes below
Keyboard Wedge
Scan a bar code below
*USB KEYBOARD (HID)
SNAPI WITHOUT IMAGING
IBM PC/AT and IBM PC COMPATIBLE
IBM HAND-HELD USB
SIMPLE COM PORT EMULATION
IBM TABLE TOP USB
USB CDC Host
IBM 46XX
IBM 46XX
Scan ONE of the bar codes below
The Auto-Host Detect Cable feature automatically detects the host interface type,
but there is no default setting. Scan one of the bar codes below to select the
appropriate port.
NON-IBM SCANNER EMULATION (PORT 5B)
HAND-HELD SCANNER EMULATION (PORT 9B)
TABLE-TOP SCANNER EMULATION (PORT 17)
CRADLE INSERTION
The interface cable automatically detects the host interface type and uses the
default setting. If the default (*) does not meet your requirements, scan another
host bar code below.
The interface cable automatically detects the host interface type and uses the
default setting. If the default (*) does not meet your requirements, scan another
host bar code below.
The Auto-Host Detect Cable feature automatically detects the host interface type
and uses the default setting. If the default (*) does not meet your requirements,
scan the IBM PC/AT and IBM PC COMPATIBLE bar code below.
USB - OVERRIDE CAPS LOCK KEY (ENABLE)
*USB - DO NOT OVERRIDE CAPS LOCK KEY (DISABLE)
*IBM AT NOTEBOOK
SNAPI WITH IMAGING
SSI OVER USB CDC
USB OPOS HAND- HELD
RS-232
RS-232
Scan ONE of the bar codes below
ICL RS-232
NIXDORF RS-232 MODE A
NIXDORF RS-232 MODE B
FUJITSU RS-232
OPOS/JPOS
*STANDARD RS-232
http://www.zebra.com/3600series
USB CAPS LOCK OVERRIDE BAR CODE
ADD A TAB KEY
To add a Tab key after scanned data, scan
the bar code below.
ADD A TAB KEY
TAB KEY BAR CODE
RETURN TO FACTORY DEFAULTS
SET DEFAULTS / ENTER KEY BAR CODESCRADLE CABLE CONNECTION
ADD AN ENTER KEY
To add an Enter key after scanned data, scan
the bar code below.
(Carriage Return/Line Feed)
ADD AN ENTER KEY (CARRIAGE RETURN/LINE FEED)
DS3678
Quick Start Guide
Digital Scanner
with Keypad & Display
POST IN WORK AREAPOST IN WORK AREA
BATTERY INSERTION/REMOVAL
1
2
3
4
Lock
Unlock
Latch
Host Port
(Under Latch)
123Scan is an easy-to-use, PC-based software tool that enables rapid and easy customized setup of a scanner via a bar code or USB cable. For more information, visit: www.zebra.com/123Scan.
123 S can
5 System/Decode LED
6 Battery Latch
7 Lanyard Catch
8 Sound Port
Display
Page Button
LEDs (two)
Replace Illustration
Replace Illustration
Replace Illustration
Replace Illustration
Replace Illustration
Replace Illustrations
Replace Illustrations
9 Home
10 Enter
11 Backspace
12 %ඇXH6KLIW)XQFWLRQ
13 4-way Navigaton Arrows
14 *UHHQ6KLIW)XQFWLRQ
Keypad with
$ඇSKD1XPHULF.H\V