User manual

16 DS3678 Quick Start Guide
Laser Devices
Class 2 laser scanners use a low power, visible light diode. As with any very bright light source such as the sun, the
user should avoid staring directly into the light beam. Momentary exposure to a Class 2 laser is not known to be
harmful.
The following statement is required to comply with US and international regulations.
LED Compliance Statement: Classified as 'EXEMPT RISK GROUP' according to IEC 62471:2006 and
EN 62471:2008. Pulse duration: Continuous.
Scanner Labeling
Batteries
Taiwan - Recycling
EPA (Environmental Protection Administration) requires dry battery producing or importing firms in accordance with
Article 15 of the Waste Disposal Act are required to indicate the recycling marks on the batteries used in sales,
giveaway, or promotion. Contact a qualified Taiwanese recycler for proper battery disposal.
CAUTION Use of controls, adjustments, or the performance of procedures other than those specified
herein may result in hazardous laser light exposure.
LASER LIGHT- DO NOT STARE
INTO BEAM CLASS 2 LASER
PRODUCT
DS3678-SR - Label not applicable.
DS3678-DP - Label located on side
of scanner.
COMPLIES WITH 21 CFR1040.10 AND
1040.11 EXCEPT FOR DEVIATIONS
PURSUANT TO LASER NOTICE NO. 50,
DATED JUNE 24, 2007, AND IEC/EN
60825-1:2007 and/or IEC/EN
60825-1:2014
CAUTION-CLASS 2 LASER
LIGHT WHEN OPEN. AVOID
DIRECT EYE CONTACT.
DS3678-SR LED - Exempt
Risk Group
DS3678-ER Class 2
DS3678-HP Class 2
DS3678-HD Class 2
DS3678-DP Class 2