DS3678 Digital Scanner Quick Start Guide
DS3678 Quick Start Guide Zebra reserves the right to make changes to any product to improve reliability, function, or design. Zebra does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein.
DS3678 Quick Start Guide 3 Introduction The DS3678 cordless digital scanner combines excellent scanning performance and advanced ergonomics to provide the best value in a lightweight laser scanner, ensuring comfort and ease of use for extended periods of time.
DS3678 Quick Start Guide Cradle Cable Connection Latch Host Port (Under Latch) Cradle Insertion.
DS3678 Quick Start Guide 5 Host Interface Connections and Setup USB Scan one of the bar codes below The interface cable automatically detects the host interface type and uses the default setting. If the default (*) does not meet your requirements, scan another host bar code below.
DS3678 Quick Start Guide USB (continued) IBM TABLE TOP USB IBM HAND-HELD USB SNAPI WITHOUT IMAGING SNAPI WITH IMAGING USB OPOS HAND-HELD SSI OVER USB CDC SIMPLE COM PORT EMULATION
DS3678 Quick Start Guide 7 RS-232 Scan one of the bar codes below The interface automatically detects the host interface type and uses the default setting. If the default (*) does not meet your requirements, scan another host bar code below.
DS3678 Quick Start Guide RS-232 (continued) FUJITSU RS-232 OPOS/JPOS Keyboard Wedge Scan a bar code below The Auto-Host Detect Cable feature automatically detects the host interface type and uses the default setting. If the default (*) does not meet your requirements, scan the IBM PC/AT and IBM PC COMPATIBLE bar code below.
DS3678 Quick Start Guide 9 IBM 46XX Scan one of the bar codes below The Auto-Host Detect Cable feature automatically detects the host interface type, but there is no default setting. Scan one of the bar codes below to select the appropriate port.
DS3678 Quick Start Guide Set Defaults Bar Code RETURN TO FACTORY DEFAULTS Enter Key Bar Code (Carriage Return/Line Feed) Add an Enter key after scanned data. ADD AN ENTER KEY (CARRIAGE RETURN/LINE FEED) Tab Key Bar Code Add a Tab key after scanned data.
DS3678 Quick Start Guide 11 DS3678 Aiming HP/HD Aiming Cover the entire bar code with the aiming pattern to ensure it is within the field of view. SR Aiming For best results, aim the aiming dot at the center of the bar code. ER Aiming Cover the entire bar code with the aiming pattern to ensure it is within the field of view. DP Aiming For best results, aim the aiming dot at the center of the bar code.
DS3678 Quick Start Guide LED Indications Indication LED Hand-Held Scanning The scanner is on and ready to scan, or no power to the scanner Off A bar code is successfully decoded Green Transmission error Red Hand-Free (Presentation) Scanning No power to the scanner Off The scanner is on and ready to scan Green A bar code is successfully decoded Off momentarily Transmission error Red Beeper Indications Indication Beeper Sequence Power up Low/medium/high beep A bar code is successfully
DS3678 Quick Start Guide 13 Troubleshooting Problem Scanner not working. Scanner decoding bar code, but data not transmitting to host. Scanner not decoding bar code. Scanned data incorrectly displayed on host. Possible Causes Possible Solutions No power to scanner. Check system power. Scanner is disabled. Ensure that correct host interface cable is used. Host interface not configured properly. Scan appropriate host parameter bar codes. Interface cable is loose.
DS3678 Quick Start Guide Regulatory Information This device is approved under Zebra Technologies Corporation. This guide applies to Model Number: DS3678. All Zebra devices are designed to be compliant with rules and regulations in locations they are sold and will be labeled as required. Local language translations are available at the following website: http://www.zebra.com/support.
DS3678 Quick Start Guide 15 Warnings for Use of Wireless Devices CAUTION Please observe all warning notices with regard to the usage of wireless devices. Safety in Hospitals Wireless devices transmit radio frequency energy and may affect medical electrical equipment. Wireless devices should be switched off wherever you are requested to do so in hospitals, clinics or healthcare facilities. These requests are designed to prevent possible interference with sensitive medical equipment.
DS3678 Quick Start Guide Laser Devices Class 2 laser scanners use a low power, visible light diode. As with any very bright light source such as the sun, the user should avoid staring directly into the light beam. Momentary exposure to a Class 2 laser is not known to be harmful. The following statement is required to comply with US and international regulations.
DS3678 Quick Start Guide 17 Battery Information CAUTION Risk of explosion if battery is replaced by an incorrect type. Dispose of batteries according to instructions. Use only Zebra approved batteries. Accessories which have battery charging capability are approved for use with the following battery models: Part Number 82-166537-01 (3.6 Vdc, 3200 mAh). Zebra approved rechargeable battery packs are designed and constructed to the highest standards within the industry.
DS3678 Quick Start Guide Radio Frequency Interference Requirements - FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Japan (VCCI) - Voluntary Control Council for Interference Class B ITE Korea Warning Statement for Class B ITE Chile Este equipo cumple con la Resolución No 403 de 2008, de la Subsecretaria de telecomunicaciones, relativa a radiaciones electromagnéticas. China http://www.zebra.com/contact Taiwan South Korea Ukraine Eurasian Customs Union Евразийский Таможенный Союз Данный продукт соответствует требованиям знака EAC. Thailand เครื่ องโทรคมนาคมและอุปกรณ์น้ ี มีความสอดคล้องตามข้อกําหนดของ กทช.
DS3678 Quick Start Guide Waste Electrical and Electronic Equipment (WEEE) Bulgarish: За клиенти от ЕС: След края на полезния им живот всички продукти трябва да се връщ ат на Zebra за рециклиране. За информация относно връщането на продукти, моля отидете на адрес http://www.zebra.com/weee. Čeština: Pro zákazníky z EU: Všechny produkty je nutné po skončení jejich životnosti vrátit společnosti Zebra k recyklaci. Informace o způsobu vrácení produktu najdete na webové stránce: http://www.zebra.
DS3678 Quick Start Guide China RoHS 21
Zebra Technologies Corporation Lincolnshire, IL U.S.A. http://www.zebra.com © 2017 ZIH Corp and/or its affiliates. All rights reserved. ZEBRA and the stylized Zebra head are trademarks of ZIH Corp, registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners.
