Instructions

5 - 10 DS36X8 Digital Scanner Product Reference Guide
Bluetooth Friendly Name
Parameter # 607 (F1h 5Fh)
You can set a meaningful name for the digital scanner that appears in the application during device discovery. The
default name is the digital scanner name followed by its serial number, e.g., DS3678 123456789ABCDEF.
Scanning Set Defaults reverts the digital scanner to this name; use custom defaults to maintain the
user-programmed name through a Set Defaults operation.
To set a new Bluetooth Friendly Name, scan the following barcode, then scan up to 23 characters from Appendix G,
Alphanumeric Bar Codes. If the name contains less than 23 characters, Then scan End of Message in the
Advanced Data Formatting Guide.
NOTE If the scanner was discovered previously by a PC/tablet/phone, it may take a while for the new name to
appear as the PC/tablet/phone needs to update its list. Try turning the radio off and then on or reboot your
PC/tablet/phone.
NOTE If your application allows you to set a device name, this takes precedence over the Bluetooth Friendly
Name.
Bluetooth Friendly Name