Instructions

5 - 6 DS36X8 Digital Scanner Product Reference Guide
Simple Serial Interface (SSI)
Select this host type when connecting to a Zebra mobile device or PC/tablet/phone running a Zebra scanner
SDK app.
• SSI BT Classic (Non-discoverable) - Enables communication with Zebra Mobile Computers. It enables the
scanner(s) to establish a connection with the host over Classic Bluetooth radio. The scanner is NOT in
discoverable (Master mode).
To establish a connection (initial setup only):
i. Scan the SSI BT Classic (Non-discoverable) barcode.
ii. Scan a pairing barcode with the host device's MAC address.
• SSI BT Classic (Discoverable) - Enables communication with Scanner SDK for Android generated apps. It
enables the host to establish a connection with the scanner over Classic Bluetooth radio. The scanner is in
discoverable (Slave mode).
To establish a connection (initial setup only):
i. Scan the SSI BT Classic (Discoverable) barcode.
ii. From the host, discover Bluetooth devices.
iii. Select your scanner from your discovered device list.
• SSI BT LE - Enables communication with Scanner SDK for iOS generated apps. It enables the host to
establish a connection with the scanner over Bluetooth Low Energy radio. The scanner is in discoverable
(Slave mode).
To establish a connection (initial setup only):
i. Scan the SSI BT LE barcode.
ii. From the host's application, select your scanner from the discovered device list.
NOTE Additional steps may be necessary depending on host's Bluetooth stack.