Instructions
Table Of Contents
- Warranty
- Revision History
- Table of Contents
- About This Guide
- Chapter 1 Getting Started
- Chapter 2 123Scan and Software Tools
- Chapter 3 Data Capture
- Chapter 4 Maintenance & Technical Specifications
- Chapter 5 Radio Communications
- Introduction
- Radio Communications Parameter Defaults
- Wireless Beeper Definitions
- Radio Communications Host Types
- Bluetooth Friendly Name
- Wi-Fi Friendly Mode
- Radio Output Power
- Bluetooth Radio State
- HID Host Parameters
- Reconnect Attempt Beep Feedback
- Out of Range Indicator
- Beep on Insertion
- Digital Scanner(s) To Cradle Support
- Batch Mode
- Persistent Batch Storage
- Page Button
- Page Options
- Bluetooth Classic Bluetooth and/or Low Energy (Cradle Parameter Only/ Cradle Host Only)
- Bluetooth Security
- Bluetooth Radio, Linking, and Batch Operation
- Chapter 6 User Preferences & Miscellaneous Options
- Introduction
- Scanning Sequence Examples
- Errors While Scanning
- User Preferences Parameter Defaults
- User Preferences
- Default Parameters
- Parameter Bar Code Scanning
- Beep After Good Decode
- Beep on
- Direct Decode Indicator
- Beeper Volume
- Beeper Tone
- Beeper Duration
- Suppress Power Up Beeps
- Decode Pager Motor
- Decode Pager Motor Duration
- Low Power Mode
- Timeout to Low Power Mode from Auto Aim
- DS3608-ER Power Mode
- Battery Preservation Mode
- Hand-held Trigger Mode
- Hands-free Mode
- Hand-held Decode Aiming Pattern
- Hands-free Decode Aiming Pattern
- Picklist Mode
- Outdoor Picklist Mode
- FIPS Mode
- Continuous Bar Code Read
- Unique Bar Code Reporting
- Decode Session Timeout
- Hands-free Decode Session Timeout
- Timeout Between Decodes, Same Symbol
- Timeout Between Decodes, Different Symbols
- Mobile Phone/Display Mode
- PDF Prioritization
- PDF Prioritization Timeout
- Presentation Mode Field of View
- Decoding Illumination
- Motion Tolerance (Hand-held Trigger Modes Only)
- Ranging Light Immunity
- Battery Threshold
- Add an Enter Key
- Transmit Code ID Character
- Prefix/Suffix Values
- Scan Data Transmission Format
- FN1 Substitution Values
- Transmit “No Read” Message
- Unsolicited Heartbeat Interval
- Product ID (PID) Type
- Product ID (PID) Value
- UID Parsing
- DPM Mode
- DPM Illumination Control
- DPM Rough Shiny Surface Decoding
- Ultra High Density DPM Decoding
- Chapter 7 Imaging Preferences
- Introduction
- Scanning Sequence Examples
- Errors While Scanning
- Imaging Preferences Parameter Defaults
- Imaging Preferences
- Operational Modes
- Image Capture Illumination
- Image Capture Autoexposure
- Fixed Exposure
- Gain/Exposure Priority for Snapshot Mode
- Snapshot Mode Timeout
- Snapshot Aiming Pattern
- Silence Operational Mode Changes
- Image Cropping
- Crop to Pixel Addresses
- Image Size (Number of Pixels)
- Image Brightness (Target White)
- JPEG Image Options
- JPEG Target File Size
- JPEG Quality and Size Value
- Image Enhancement
- Image File Format Selector
- Image Rotation
- Bits Per Pixel
- Signature Capture
- Signature Capture File Format Selector
- Signature Capture Bits Per Pixel
- Signature Capture Width
- Signature Capture Height
- Signature Capture JPEG Quality
- Video View Finder
- Video View Finder Image Size
- Chapter 8 USB Interface
- Introduction
- Connecting a USB Interface
- USB Parameter Defaults
- USB Host Parameter
- USB Device Type
- Symbol Native API (SNAPI) Status Handshaking
- USB Keystroke Delay
- USB CAPS Lock Override
- USB Ignore Unknown Characters
- USB Convert Unknown to Code 39
- Emulate Keypad
- Emulate Keypad with Leading Zero
- Quick Keypad Emulation
- USB Keyboard FN 1 Substitution
- Function Key Mapping
- Simulated Caps Lock
- Convert Case
- USB Static CDC
- Optional USB Parameters
- ASCII Character Set for USB
- Chapter 9 SSI Interface
- Chapter 10 RS-232 Interface
- Chapter 11 IBM Interface
- Chapter 12 Keyboard Wedge Interface
- Chapter 13 Symbologies
- Introduction
- Scanning Sequence Examples
- Errors While Scanning
- Symbology Parameter Defaults
- Enable/Disable All Code Types
- UPC/EAN
- Enable/Disable UPC-A
- Enable/Disable UPC-E
- Enable/Disable UPC-E1
- Enable/Disable EAN-8/JAN-8
- Enable/Disable EAN-13/JAN-13
- Enable/Disable Bookland EAN
- Decode UPC/EAN/JAN Supplementals
- User-Programmable Supplementals
- UPC/EAN/JAN Supplemental Redundancy
- UPC/EAN/JAN Supplemental AIM ID Format
- UPC Reduced Quiet Zone
- Transmit UPC-A Check Digit
- Transmit UPC-E Check Digit
- Transmit UPC-E1 Check Digit
- UPC-A Preamble
- UPC-E Preamble
- UPC-E1 Preamble
- Convert UPC-E to UPC-A
- Convert UPC-E1 to UPC-A
- EAN-8/JAN-8 Extend
- Bookland ISBN Format
- UCC Coupon Extended Code
- Coupon Report
- ISSN EAN
- Code 128
- Code 39
- Code 93
- Code 11
- Interleaved 2 of 5 (ITF)
- Discrete 2 of 5 (DTF)
- Codabar (NW - 7)
- MSI
- Chinese 2 of 5
- Matrix 2 of 5
- Korean 3 of 5
- Inverse 1D
- GS1 DataBar
- Composite
- 2D Symbologies
- Postal Codes
- Symbology-Specific Security Levels
- Report Version
- Macro PDF Features
- Chapter 14 Intelligent Document Capture
- Introduction
- The IDC Process
- PC Application and Programming Support
- Parameters
- IDC Operating Mode
- IDC Symbology
- IDC X Coordinate
- IDC Y Coordinate
- IDC Width
- IDC Height
- IDC Aspect
- IDC File Format Selector
- IDC Bits Per Pixel
- IDC JPEG Quality
- IDC Find Box Outline
- IDC Minimum Text Length
- IDC Maximum Text Length
- IDC Captured Image Brighten
- IDC Captured Image Sharpen
- IDC Border Type
- IDC Delay Time
- IDC Zoom Limit
- IDC Maximum Rotation
- Quick Start
- Chapter 15 Digimarc Barcode
- Chapter 16 Data Formatting: ADF, MDF, Preferred Symbol
- Chapter 17 OCR Programming
- Introduction
- OCR Programming Parameters
- Enable/Disable OCR-A
- OCR-A Variant
- Enable/Disable OCR-B
- OCR-B Variant
- Enable/Disable MICR E13B
- Enable/Disable US Currency Serial Number
- OCR Orientation
- OCR Lines
- OCR Minimum Characters
- OCR Maximum Characters
- OCR Subset
- OCR Quiet Zone
- OCR Template
- OCR Check Digit Modulus
- OCR Check Digit Multiplier
- OCR Check Digit Validation
- Inverse OCR
- OCR Redundancy
- Appendix A Standard Default Parameters
- Appendix B Country Codes
- Appendix C Country Code Pages
- Appendix D CJK Decode Control
- Appendix E Programming Reference
- Appendix F Sample Bar Codes
- Appendix G Alphanumeric Bar Codes
- Appendix H Numeric Bar Codes
- Appendix I ASCII Character Sets
- Appendix J Communication Protocol Functionality
- Appendix K Signature Capture Code
- Appendix L Non-Parameter Attributes
- Index
Radio Communications 5 - 3
Reconnect Attempt Interval 558 F1h 2Eh 30 Seconds
5-27
Auto-reconnect 604 F1h 5Ch Auto-reconnect
Immediately
5-29
Sleep Between Attempts 1778 F8h 06h F2h
Sleep for 1 Minute 5-30
Number of Retry Attempts 1779 F8h 06h F3h Do Not Retry
5-31
Beep on Insertion 288 120h Enable
5-33
Modes of Operation
(Point-to-Point/Multipoint-to-Point)
538 F1h 1Ah Point-to-Point
5-34
Parameter Broadcast (Cradle Host
Only)
148 94h Enable
5-35
Pairing Modes 542 F1h 1Eh Unlocked
5-36
Pairing Methods 545 F1h 21h Enable
5-37
Toggle Pairing 1322 F8h 05h 2Ah Disable
5-38
Connection Maintenance Interval 5002 N/A 15 Minutes
5-39
Batch Mode 544 F1h 20h Normal (Do Not Batch
Data)
5-42
Persistent Batch Storage 1399 F8h 05h 77h Disable
5-45
Page Button 746 F1h EAh Enable
5-46
Page Options
Page Mode
Page State Timeout
1364
1365
F8h 05h 54h
F8h 05h 55h
Page Simple
5-47
5-48
Bluetooth Classic and/or Low Energy
(Cradle Parameter Only/Cradle Host
Only)
1355 F8h 05h 4Bh Classic and Low Energy
5-48
PIN Code (Set and Store) 552 F1h 28h 12345
5-49
Variable Pin Code 608 F1h 60h Static
(Default PIN code is
12345)
5-50
Bluetooth Security Levels 1393 F8h 05h 71h Low
5-51
Save Bluetooth Connection Information 1743 F8h 06h CFh Enable
5-53
Table 5-1 Radio Communication Default Table (Continued)
Parameter
Parameter
Number
1
SSI
Number
2
Default
Page
Number
1. Parameter number decimal values are used for programming via RSM commands.
2. SSI number hex values are used for programming via SSI commands.