Instructions

5 - 2 DS36X8 Digital Scanner Product Reference Guide
Radio Communications Parameter Defaults
Table 5-1 lists the defaults for radio communication parameters. If you wish to change any option, scan the
appropriate barcode(s) provided in the Radio Communications Parameters section beginning on page 5-4.
NOTE See Appendix A, Standard Default Parameters for all user preferences, hosts, symbologies, and default
parameters.
In this guide, the parameter numbers listed are the same as the attribute numbers for these parameters.
NOTE See Appendix B, Country Codes for Country Keyboard Types (Country Codes).
Table 5-1 Radio Communication Default Table
Parameter
Parameter
Number
1
SSI
Number
2
Default
Page
Number
Radio Communications Host Types 383 F0h 7Fh Cradle Host 5-4
BT Friendly Name 607 F1h 5Fh n/a 5-10
Discoverable Mode 610 F1h 62h General 5-11
Wi-Fi Friendly Mode 1299 F8h 05h 13h Disable 5-12
Wi-Fi Friendly Channel Exclusion 1297 F8h 05h 11h Use All Channels 5-13
Radio Output Power 1324 F8h 05h
12Ch
High 5-16
Link Supervision Timeout 1698 F8h 06h A2h 5 Seconds 5-17
Bluetooth Radio State 1354 F8h 05h 4Ah On 5-18
Apple iOS Virtual Keyboard Toggle 1114 F8h 04h 5Ah Disable 5-19
HID Keyboard Keystroke Delay N/A N/A No Delay (0 msec) 5-20
CAPS Lock Override N/A N/A Disable 5-20
HID Ignore Unknown Characters N/A N/A Send Bar Codes with
Unknown Characters
5-21
Emulate Keypad N/A N/A Enable 5-21
Fast HID Keyboard 1361 F8h 05h 51h Enable 5-22
Quick Keypad Emulation 1362 F8h 05h 52h Enable 5-22
Keyboard FN1 Substitution N/A N/A Disable 5-23
Function Key Mapping N/A N/A Disable 5-23
Simulated Caps Lock N/A N/A Disable 5-24
Convert Case N/A N/A No Case Conversion 5-24
Reconnect Attempt Beep Feedback 559 F1h 2Fh Disable 5-26
1. Parameter number decimal values are used for programming via RSM commands.
2. SSI number hex values are used for programming via SSI commands.