Instructions

Data Capture 3 - 3
Bluetooth attempting reconnection (default is disable). Five high System LED: None
Radio LED: Red blinking
Paging state indication Six high System LED: Blue (fast,
fast, slow)
Battery Indications
Low battery indication (on trigger release) Four short high beeps Red (stays on)
Battery LED status 99-51% Green
21-50% Amber
0-20% Red
Battery end of life 99-51% Green/red
alternating
21-50% Amber/red
alternating
0-20% Red blinking
Parameter Programming
Input error, incorrect barcode or Cancel scanned, wrong
entry, incorrect barcode programming sequence;
remain in program mode.
Long low/long high beeps Red
Keyboard parameter selected. Enter value using
barcode keypad.
High/low beeps Green
Successful program exit with change in the parameter
setting.
High/low/high/low beeps Green
ADF Programming
ADF transmit error. Low/high/low beeps None
Number expected. Enter another digit. Add leading
zeros to the front if necessary.
High/low beeps Green
Alpha expected. Enter another alphabetic character or
scan the
End of Message barcode.
Low/low beeps Green
ADF criteria or action is expected. Enter another criteria
or action or scan the
Save Rule barcode.
High/high beeps Green blinking
All criteria or actions cleared for current rule, continue
entering rule.
High/low/low beeps Green
Rule saved. Rule entry mode exited. High/low/high/low beeps Green
(turns off blinking)
Rule error. Entry error, wrong barcode scanned, or
criteria/action list is too long for a rule. Re-enter criteria
or action.
Long low/long high beeps Red
Deleted last saved rule. The current rule is left intact. Low beep Green
Table 3-1 DS3678 Scanner Beeper and LED Definitions
Event Beeper Sequence LED