Instructions

3 - 2 DS36X8 Digital Scanner Product Reference Guide
Table 3-1 DS3678 Scanner Beeper and LED Definitions
Event Beeper Sequence LED
Standard Use
Power up. Low/medium/high beeps Green
Scanning
Presentation Mode on. None Green solid
Presentation Mode off. None No LED; green LED is
turned off
A barcode was successfully decoded. (See
Chapter 6,
User Preferences & Miscellaneous Options
for
programming beeper sounds.)
Medium beep
(or as configured)
Green flash
Parity error. Low/low/low/extra low
beeps
Red
A transmission error was detected in a scanned symbol.
The data is ignored. This occurs if a unit is not properly
configured. Check option setting.
Four long low beeps Red
Conversion or format error. Five long low beeps Red
A <BEL> character is received over RS-232. High None
Wireless Operation
Out of batch storage memory, unable to store new
barcode.
Low, high, low, high Red
Radio Indications
Scanner inserted into a cradle (may be disabled). Low System LED: None
Radio LED: None
Bluetooth connection established. Low, high System LED: Green
Radio LED: Green (Stays
on after trigger hold for 3
seconds)
Bluetooth disconnection event. High, low System LED: Red
Radio LED: Red (Stays on
at trigger pull)
Bluetooth Page timeout; remote device is out of
range/not powered.
Long low, long high System LED: Red
Radio LED: Red (Stays on
at trigger pull)
Bluetooth connection attempt was rejected by remote
device.
Long low, long high, long
low, long high
System LED: None
Radio LED: Red (Stays on
at trigger pull)
Bluetooth attempting reconnection. None System LED: None
Radio LED: Red blinking