Instructions
Table Of Contents
- Warranty
- Revision History
- Table of Contents
- About This Guide
- Chapter 1 Getting Started
- Chapter 2 123Scan and Software Tools
- Chapter 3 Data Capture
- Chapter 4 Maintenance & Technical Specifications
- Chapter 5 Radio Communications
- Introduction
- Radio Communications Parameter Defaults
- Wireless Beeper Definitions
- Radio Communications Host Types
- Bluetooth Friendly Name
- Wi-Fi Friendly Mode
- Radio Output Power
- Bluetooth Radio State
- HID Host Parameters
- Reconnect Attempt Beep Feedback
- Out of Range Indicator
- Beep on Insertion
- Digital Scanner(s) To Cradle Support
- Batch Mode
- Persistent Batch Storage
- Page Button
- Page Options
- Bluetooth Classic Bluetooth and/or Low Energy (Cradle Parameter Only/ Cradle Host Only)
- Bluetooth Security
- Bluetooth Radio, Linking, and Batch Operation
- Chapter 6 User Preferences & Miscellaneous Options
- Introduction
- Scanning Sequence Examples
- Errors While Scanning
- User Preferences Parameter Defaults
- User Preferences
- Default Parameters
- Parameter Bar Code Scanning
- Beep After Good Decode
- Beep on
- Direct Decode Indicator
- Beeper Volume
- Beeper Tone
- Beeper Duration
- Suppress Power Up Beeps
- Decode Pager Motor
- Decode Pager Motor Duration
- Low Power Mode
- Timeout to Low Power Mode from Auto Aim
- DS3608-ER Power Mode
- Battery Preservation Mode
- Hand-held Trigger Mode
- Hands-free Mode
- Hand-held Decode Aiming Pattern
- Hands-free Decode Aiming Pattern
- Picklist Mode
- Outdoor Picklist Mode
- FIPS Mode
- Continuous Bar Code Read
- Unique Bar Code Reporting
- Decode Session Timeout
- Hands-free Decode Session Timeout
- Timeout Between Decodes, Same Symbol
- Timeout Between Decodes, Different Symbols
- Mobile Phone/Display Mode
- PDF Prioritization
- PDF Prioritization Timeout
- Presentation Mode Field of View
- Decoding Illumination
- Motion Tolerance (Hand-held Trigger Modes Only)
- Ranging Light Immunity
- Battery Threshold
- Add an Enter Key
- Transmit Code ID Character
- Prefix/Suffix Values
- Scan Data Transmission Format
- FN1 Substitution Values
- Transmit “No Read” Message
- Unsolicited Heartbeat Interval
- Product ID (PID) Type
- Product ID (PID) Value
- UID Parsing
- DPM Mode
- DPM Illumination Control
- DPM Rough Shiny Surface Decoding
- Ultra High Density DPM Decoding
- Chapter 7 Imaging Preferences
- Introduction
- Scanning Sequence Examples
- Errors While Scanning
- Imaging Preferences Parameter Defaults
- Imaging Preferences
- Operational Modes
- Image Capture Illumination
- Image Capture Autoexposure
- Fixed Exposure
- Gain/Exposure Priority for Snapshot Mode
- Snapshot Mode Timeout
- Snapshot Aiming Pattern
- Silence Operational Mode Changes
- Image Cropping
- Crop to Pixel Addresses
- Image Size (Number of Pixels)
- Image Brightness (Target White)
- JPEG Image Options
- JPEG Target File Size
- JPEG Quality and Size Value
- Image Enhancement
- Image File Format Selector
- Image Rotation
- Bits Per Pixel
- Signature Capture
- Signature Capture File Format Selector
- Signature Capture Bits Per Pixel
- Signature Capture Width
- Signature Capture Height
- Signature Capture JPEG Quality
- Video View Finder
- Video View Finder Image Size
- Chapter 8 USB Interface
- Introduction
- Connecting a USB Interface
- USB Parameter Defaults
- USB Host Parameter
- USB Device Type
- Symbol Native API (SNAPI) Status Handshaking
- USB Keystroke Delay
- USB CAPS Lock Override
- USB Ignore Unknown Characters
- USB Convert Unknown to Code 39
- Emulate Keypad
- Emulate Keypad with Leading Zero
- Quick Keypad Emulation
- USB Keyboard FN 1 Substitution
- Function Key Mapping
- Simulated Caps Lock
- Convert Case
- USB Static CDC
- Optional USB Parameters
- ASCII Character Set for USB
- Chapter 9 SSI Interface
- Chapter 10 RS-232 Interface
- Chapter 11 IBM Interface
- Chapter 12 Keyboard Wedge Interface
- Chapter 13 Symbologies
- Introduction
- Scanning Sequence Examples
- Errors While Scanning
- Symbology Parameter Defaults
- Enable/Disable All Code Types
- UPC/EAN
- Enable/Disable UPC-A
- Enable/Disable UPC-E
- Enable/Disable UPC-E1
- Enable/Disable EAN-8/JAN-8
- Enable/Disable EAN-13/JAN-13
- Enable/Disable Bookland EAN
- Decode UPC/EAN/JAN Supplementals
- User-Programmable Supplementals
- UPC/EAN/JAN Supplemental Redundancy
- UPC/EAN/JAN Supplemental AIM ID Format
- UPC Reduced Quiet Zone
- Transmit UPC-A Check Digit
- Transmit UPC-E Check Digit
- Transmit UPC-E1 Check Digit
- UPC-A Preamble
- UPC-E Preamble
- UPC-E1 Preamble
- Convert UPC-E to UPC-A
- Convert UPC-E1 to UPC-A
- EAN-8/JAN-8 Extend
- Bookland ISBN Format
- UCC Coupon Extended Code
- Coupon Report
- ISSN EAN
- Code 128
- Code 39
- Code 93
- Code 11
- Interleaved 2 of 5 (ITF)
- Discrete 2 of 5 (DTF)
- Codabar (NW - 7)
- MSI
- Chinese 2 of 5
- Matrix 2 of 5
- Korean 3 of 5
- Inverse 1D
- GS1 DataBar
- Composite
- 2D Symbologies
- Postal Codes
- Symbology-Specific Security Levels
- Report Version
- Macro PDF Features
- Chapter 14 Intelligent Document Capture
- Introduction
- The IDC Process
- PC Application and Programming Support
- Parameters
- IDC Operating Mode
- IDC Symbology
- IDC X Coordinate
- IDC Y Coordinate
- IDC Width
- IDC Height
- IDC Aspect
- IDC File Format Selector
- IDC Bits Per Pixel
- IDC JPEG Quality
- IDC Find Box Outline
- IDC Minimum Text Length
- IDC Maximum Text Length
- IDC Captured Image Brighten
- IDC Captured Image Sharpen
- IDC Border Type
- IDC Delay Time
- IDC Zoom Limit
- IDC Maximum Rotation
- Quick Start
- Chapter 15 Digimarc Barcode
- Chapter 16 Data Formatting: ADF, MDF, Preferred Symbol
- Chapter 17 OCR Programming
- Introduction
- OCR Programming Parameters
- Enable/Disable OCR-A
- OCR-A Variant
- Enable/Disable OCR-B
- OCR-B Variant
- Enable/Disable MICR E13B
- Enable/Disable US Currency Serial Number
- OCR Orientation
- OCR Lines
- OCR Minimum Characters
- OCR Maximum Characters
- OCR Subset
- OCR Quiet Zone
- OCR Template
- OCR Check Digit Modulus
- OCR Check Digit Multiplier
- OCR Check Digit Validation
- Inverse OCR
- OCR Redundancy
- Appendix A Standard Default Parameters
- Appendix B Country Codes
- Appendix C Country Code Pages
- Appendix D CJK Decode Control
- Appendix E Programming Reference
- Appendix F Sample Bar Codes
- Appendix G Alphanumeric Bar Codes
- Appendix H Numeric Bar Codes
- Appendix I ASCII Character Sets
- Appendix J Communication Protocol Functionality
- Appendix K Signature Capture Code
- Appendix L Non-Parameter Attributes
- Index
CJK Decode Control D - 7
Unicode/CJK Decode Setup with Windows Host
This section describes how to set up CJK decode with a Windows host.
Setting Up the Windows Registry Table for Unicode Universal Output
To support the Unicode universal output method, set up the Windows host registry table as follows:
1. Select Start > Run > regedt32 to start the registry editor.
2. Under HKEY_Current_User\Control Panel\Input Method, set EnableHexNumpad to 1 as follows:
[HKEY_CURRENT_USER\Control Panel\Input Method]
"EnableHexNumpad"="1"
If this key does not exist, add it as type REG_SZ (string value).
3. Reboot the computer to implement the registry change.
Adding CJK IME on Windows
To add the desired CJK input language:
1. Click Start > Control Panel.
2. If the Control Panel opens in category view, select Switch to Classic View in the top left corner.
3. Select Regional and Language Options.
4. Click the Language tab.
5. Under Supplemental Language Support, select the Install Files for East Asian Languages check box if not
already selected, and click Apply. This may require a Windows installation CD to install the required files. This
step ensures that the East Asian Languages (CJK) are available.
6. Under Text Services and Input Language, click Details.
7. Under Installed Services, click Add.
8. In the Add Input Language dialog box, choose the CJK input language and keyboard layout or Input Method
Editor (IME) to add.
9. Click OK twice. The language indicator appears in the system tray (at bottom right corner of the desktop by
default). To switch between input languages (keyboard languages) select the language indicator in the system
tray.
10. Select the language indicator in the system tray to select the desired country keyboard type.
11. Verify that the characters displayed on each country's keyboard appear.