Instructions

1 - 12 DS36X8 Digital Scanner Product Reference Guide
Inserting Batteries
To insert batteries in the battery charger, angle the battery with the contacts facing up and slide the contact side of
the battery under the LED indicator ledge as shown below. Push down on the label surface of the battery until it
clicks in place, engaging the contacts in the battery charger.
Figure 1-10 Inserting Batteries
Lanyard
To install the optional lanyard:
1. Insert the loop on the lanyard into the slot at the bottom of the device handle.
Figure 1-11 Insert Lanyard Loop
NOTE Do not attach the tool balancer to the lanyard slot at the bottom of the device.