Manualshelf

Instructions

ManualsBrandsZEBRA ManualsScannersDS3678-SR Barcode scanner Bluetooth® 1D, 2D
431432433434435436437438439440
Table Of Contents
Intelligent Document Capture 14 - 21
IDC Demonstrations
Anchored Mode Demo
Set parameters to these values:
•
Pull the trigger. The decoder decodes the barcode and captures an image of the text scroll.
•
Rotate the form clockwise so the word Capture is along the bottom edge, and pull the trigger. The decoder
decodes the barcode and captures the same image, including orientation. (This example also works with the
form rotated counterclockwise or upside down).
•
Modify the values for height, width, x, and y. Pull the trigger. The captured area changes in size and location.
•
Cover the barcode with a small piece of paper (or your finger) and pull the trigger. The decoder does not
decode the barcode or capture an image.
What this demonstrates:
The Intelligent Document Capture Anchored mode captures an image of fixed size and location relative to a
barcode on the page. Parameters control the height, width, and location. The IDC firmware requires that a
barcode is present in order to capture an image, decodes it, and uses it to adjust the image to the upright
orientation.
Free-Form Mode Demo
Set IDC Operating Mode to Free-Form.
•
Pull the trigger. The decoder decodes the barcode and captures an image of the entire rectangle, including
the contents.
•
Modify the values for height, width, x, and y. Pull the trigger. Note that the captured image is not affected.
•
Rotate the form clockwise so the word Capture is along the bottom edge, and pull the trigger. The decoder
decodes the barcode and captures the same image, including orientation. (This example also works with the
form rotated counterclockwise or upside down).
•
Cover the barcode with a small piece of paper and pull the trigger. The decoder does not decode the barcode
and does not re-orient the captured image to the normal position, i.e., with the logo in upper-left corner.
What this demonstrates:
The Intelligent Document Capture Free-Form mode captures an image whose size and position are
determined by a rectangular border on the page. It adjusts the image to the upright orientation if a barcode is
found and decoded in the image.
Table 14-3 Anchored Mode Sample Parameter Values
Parameter Value
IDC Operating Mode Anchored
IDC Height 100
IDC Width 90
IDC X Coordinate -175
IDC Y Coordinate -50