Instructions

Getting Started 1 - 7
Inserting the DS3678 Battery
The battery resides in a chamber in the digital scanner handle. To insert the battery:
1. Lightly press down and slide the locking lever counterclockwise to unlock and release the battery door.
2. Open the battery door.
3. If a battery is already installed, turn the digital scanner upright to slide the battery out.
4. Slide the new battery into the chamber, with the rounded side toward the back and the contacts facing into the
chamber.
Figure 1-7 Inserting the Battery
5. Close the battery door.
6. Lightly press down and slide the locking lever clockwise to lock the battery door.
7. If using a brand new battery, insert the scanner into a cradle to turn the battery on.
Removing the DS3678 Battery
To remove the battery:
1. Lightly press down and slide the locking lever counterclockwise to unlock the battery door.
2. Open the battery door.
3. Turn the digital scanner upright to slide the battery out.
NOTE Batteries are shipped in an Off mode and do not power the scanner. After inserting a new
battery into the DS3678 digital scanner, you must insert the scanner into a cradle for the battery
to turn On.
Alternatively, the battery can be placed in the four slot spare battery charger to charge and then
inserted in the scanner for immediate use.
Unlock
Lock