Instructions

Getting Started 1 - 3
DS3678 Cordless Digital Scanner
DS3678 Parts
Figure 1-3 DS3678 Parts
The Cradle
The cradles serve as a charger, radio communication interface, and host communication interface for the DS3678
cordless digital scanner. There are two versions of the cradle:
• The STB3678 cordless cradle sits on a desktop or mounts on a wall, and charges the DS3678 cordless digital
scanner. This cradle also provides host communication by receiving scanner data via a Bluetooth radio, and
sending that data to the host through an attached cable. An external power supply or a powered host cable
provides power to the cradle.
• The FLB3678 cordless cradle charges the DS3678 cordless digital scanner, and provides host communication
by receiving scanner data via a Bluetooth radio, and sending that data to the host through an attached cable.
The cradle attaches to a mounting bracket using three isolators, and the bracket then mounts on the forklift
surface. A portable power supply on the forklift or a host cable provides power to the cradle.
DO NOT use cradles and cables designed for the LS3578 and DS3578 scanners as they are not compatible with
the DS3678 digital scanner and cradle.
For more information about mounting options and procedures, refer to the documentation included with the cradle.
Beeper
LEDs
Trigger
Scan Window
Battery LED
Radio LED
Battery Latch
Charging/Communication
Contacts
NOTE For more information about communication between the digital scanner, cradle, and host, see Chapter 5,
Radio Communications.