Instructions

CHAPTER 6 USER PREFERENCES &
MISCELLANEOUS
OPTIONS
Introduction
You can program the digital scanner to perform various functions, or activate different features. This chapter
describes each user preference feature and provides programming barcodes for selecting these features.
The digital scanner ships with the settings shown in Table 6-1 on page 6-2 (also see Appendix A, Standard Default
Parameters for all defaults). If the default values suit requirements, programming is not necessary.
To set feature values, scan a single barcode or a short barcode sequence. The settings are stored in non-volatile
memory and are preserved even when the digital scanner is powered down.
If not using a USB cable, select a host type (see each host chapter for specific host information) after the power-up
beeps sound. This is only necessary upon the first power-up when connected to a new host.
To return all features to default values, see Default Parameters on page 6-5. Throughout the programming barcode
menus, asterisks indicate (
*) default values.
NOTE Most computer monitors allow scanning the barcodes directly on the screen. When scanning from the
screen, be sure to set the document magnification to a level where you can see the barcode clearly, and
bars and/or spaces are not merging.
* High Volume
Feature/Option
* Indicates Default
Option Value
(0)