Instructions

5 - 50 DS36X8 Digital Scanner Product Reference Guide
Variable PIN Code
Parameter # 608
(F1h 60h)
When switching to Cradle Host mode with authentication enabled, scan Static PIN Code below to avoid entering
the PIN code manually. The PIN stored in memory is used. Scan the Variable PIN Code below to manually enter a
PIN code with each connection.
The default PIN code is the user-programmed PIN set and stored above. Typically, however, HID connections
require entering a Variable PIN Code. If, when attempting connection, the application presents a text box that
includes a PIN, scan the Variable PIN Code barcode, then re-attempt connection. When you hear a beep indicating
the digital scanner is waiting for an alphanumeric entry, enter the provided variable PIN using the Alphanumeric
Bar Codes on page G-1, then scan End of Message in the Advanced Data Formatting Guide. if the code is less
than 16 characters. The digital scanner discards the variable PIN code after connection.
* Static PIN Code
(0)
Variable PIN Code
(1)