User Manual

iii
Revision History
Changes to the original guide are listed below:
Change Date Description
-01 Rev. A 12/2016 Initial Release.
-02 Rev. A 1/2017 Initial Release with update to cleaning instructions.
-03 Rev. A 2/2017 Added Signature Capture Preferences chapter.
Updated sample bar codes.
-04 Rev. A 4/2017 Added:
- USB certification logo.
Updated:
- Maintenance section
- GS1 DataBar-14 to GS1 DataBar Omnidirectional
- Zebra copyright statement.
-05 Rev. A 6/2018 Rev. B Software Updates
Added:
- New Feedback email address.
- Grid Matrix parameters
- Febraban parameter
- USB HID POS (formerly known as Microsoft UWP USB)
- Product ID (PID) Type
- Product ID (PID) Value
- ECLevel
- Note to MSI Reduced Quiet Zone (Level 3 not supported by MSI).
Updates:
- SSI baud rate hex values for baud rates 230,400, 460,800, and 921,600.
- ISBT Concatenation default to Disable (0).
- Bar code values for enabling (2) and disabling (0) LED on Good Decode.
- Max time value in Hands-Free Decode Session Timeout.
- Picklist Mode description.
- Trigger Mode, Presentation (Blink) description.
- Parameter #744 bar codes.
-06 Rev. A
10/2018
- Added Grid Matrix sample bar code.
- Moved 123Scan chapter.