User Manual

Standard Default Parameters A - 5
Baud Rate N/A N/A 9600 9-8
Parity N/A N/A None 9-9
Stop Bits N/A N/A 1 Stop Bit 9-9
Data Bits N/A N/A 8-bit 9-10
Check Receive Errors N/A N/A Enable 9-10
Hardware Handshaking N/A N/A None 9-11
Software Handshaking N/A N/A None 9-13
Host Serial Response Timeout N/A N/A 2 Sec 9-15
RTS Line State N/A N/A Low RTS 9-16
Beep on <BEL> N/A N/A Disable 9-16
Intercharacter Delay N/A N/A 0 msec 9-17
Nixdorf Beep/LED Options N/A N/A Normal Operation 9-18
Bar Codes with Unknown Characters N/A N/A Send Bar Code With
Unknown Characters
9-18
IBM 468X/469X Host Parameters
Port Address N/A N/A None 10-4
Convert Unknown to Code 39 N/A N/A Disable 10-5
RS-485 Beep Directive N/A N/A Ignore 10-5
RS-485 Bar Code Configuration
Directive
N/A N/A Ignore 10-6
Keyboard Wedge Host Parameters
Keyboard Wedge Host Types N/A N/A IBM AT Notebook 11-4
Bar Codes with Unknown Characters N/A N/A Send Bar Codes with
Unknown Characters
11-4
Keystroke Delay N/A N/A No Delay 11-5
Intra-keystroke Delay N/A N/A Disable 11-5
Alternate Numeric Keypad Emulation N/A N/A Enable 11-6
Quick Keypad Emulation N/A N/A Enable 11-6
Simulated Caps Lock N/A N/A Disable 11-7
Caps Lock Override N/A N/A Disable 11-7
Table A-1 Parameter Defaults (Continued)
Parameter
Parameter
Number
SSI Number Default
Page
Number