User Manual

7 - 6 DS2208 Digital Scanner Product Reference Guide

USB Device Type (continued)

NOTES

1. Before scanning USB CDC Host, install the appropriate USB CDC Driver on the host to ensure the scanner

does not stall during power up (due to a failure to enumerate USB). Go to www.zebra.com/support

, Support

& Downloads > Barcode Scanners > USB CDC Driver, select the appropriate Windows platform, and

download either Zebra_CDC_ACM_Driver_(x64)v2.15.0004.exe (64 bit) or

Zebra_CDC_ACM_Driver(x86)_v2.15.0004.exe (32 bit).

To recover a stalled scanner:

Install the USB CDC Driver

Unplug the USB cable and then reconnect it to add power back to the scanner. Scan HID Keyboard or

another host.

After power-up, hold the trigger for 10 seconds, which allows the digital scanner to power up using an

alternate USB configuration. Upon power-up, scan another USB Device Type.

2. To select the Toshiba TEC device type, refer to the Toshiba TEC Programmer’s Guide.

3. Select USB HID POS to communicate over a USB cable with Universal Windows Platform (UWP)

applications running on Windows 10 devices.

USB CDC Host

SSI over USB CDC

Symbol Native API (SNAPI) with Imaging Interface

Symbol Native API (SNAPI) without Imaging Interface

USB HID POS

(for Windows 10 devices only)