User manual

2 - 4 CS4070 Scanner Product Reference Guide
Successful clear all Solid amber Imager off
Charge scanner Connect scanner
to a host PC USB
port
Flashing amber Scanner connects in mass
storage mode, auto-run
application on PC launches
Charge complete Solid green
Toggle data protection on or off
(when enabled)
Press & hold both
scan (+) and
delete (-) buttons
for 6 seconds
None
Successful data protection setting Solid amber
Enable Bluetooth radio Hold Bluetooth
button
Rapidly flashing blue
LED
Bluetooth is enabled but has
not paired with a host
Bluetooth radio pairing Press Bluetooth
button
Slowly flashing blue
LED
Bluetooth radio paired with host
and in range
Very slowly flashing
blue LED
Unpair scanner from host Hold Bluetooth
button for 2
seconds
Off
Bluetooth radio out of range of
host
Blue LED is off Stops transmitting beacons
Bluetooth radio returns to
communication range of host
Press any button Very slowly flashing
blue LED
Re-pairs device with host
Special Conditions
Memory low scan Press & hold scan
(+) button
Flashing red, then
normal operation
Delete/Clear All Press & hold
delete (-) button
Normal operation
Memory Full Scan Press & hold scan
(+) button
Solid red
Memory Full Delete/Clear All Press & hold
delete (-) button
Normal operation
Data protection (enabled and on) Scan/function/
host com
Rapidly flashing red
Unexpected failure Scan/function/dock Flashing red, green
and amber for 5
seconds
Contact support
Battery depleted Scan/function/dock None
Table 2-1 LED Indications (Continued)
Function Performed User Action LED Feedback Other