Instructions

2 - 4 CS3000 Series Scanner Product Reference Guide
Clear all bar code data
(when delete (-) button enabled)
Press & hold delete (-)
button 3 seconds past
scan time
Flashing amber Laser on
Successful clear all Solid amber Laser off
Charge scanner Connect scanner to a
host PC USB port
Flashing amber Scanner connects in
mass storage mode,
auto-run application on
PC launches
Charge complete Solid green
Toggle data protection on or off
(when enabled)
Press & hold both scan
(+) and delete (-)
buttons for 6 seconds
None
Successful data protection setting Solid amber
Enable Bluetooth radio Hold Bluetooth button
for 5 seconds
Rapidly flashing blue
LED
Bluetooth is enabled but
has not paired with a
host
Bluetooth radio pairing Press Bluetooth button Slowly flashing blue
LED
Bluetooth radio paired with host
and in range
Very slowly flashing
blue LED
Bluetooth radio out of range of
host
Blue LED is off Stops transmitting
beacons
Bluetooth radio returns to
communication range of host
Press any button Very slowly flashing
blue LED
Re-pairs device with
host
Special Conditions
Memory low scan Press & hold scan (+)
button
Flashing red, then
normal operation
Delete/Clear All Press & hold delete (-)
button
Normal operation
Memory Full Scan Press & hold scan (+)
button
Solid red
Memory Full Delete/Clear All Press & hold delete (-)
button
Normal operation
Table 2-1 LED Indications (Continued)
Function Performed User Action LED Feedback Other