Instructions

1 - 28 CS3000 Series Scanner Product Reference Guide

ScanParam Variable Any scan engine parameter. Multiple

entries are allowed. Sent after reset or

when engine is powered.

For example:

ScanParam=0xf0,0x00,0x01

ScanParam=0xee,0x01

ScanParam=0x38,0x00

<none>

CodeID Enabled

Disabled

Enable or disable saving CodeID in the

scanned bar codes file. See

Code Type

IDs on page B-1

Enabled

Maximum Bar

Code Length

Integer Maximum length of a bar code that can be

scanned and transmitted to host.

Table 1-1

Config.ini File Content (Continued)

Parameter Values Description Default