Instructions
Getting Started 1 - 27
BTSleep Integer Time in seconds before the scanner enters
sleep mode while paired to another
Bluetooth device when no activity is
detected.
600 (10 minutes)
ButtonPlus Enabled
Disabled
Enable or disable the Plus button. Enabled
ButtonMinus Enabled
Disabled
Enable or disable the Minus button. Enabled
ButtonBT Enabled
Disabled
Enable or disable the BT button. Enabled
WakeUpLED Enabled
Disabled
Enable or disable the wake-up LEDs. Disabled
LEDBlue Enabled
Disabled
Enable or disable the blue LED for normal
operation and wake up.
Enabled
LEDGreen Enabled
Disabled
Enable or disable the green LED for
normal operation and wake up
Enabled
LEDRed Enabled
Disabled
Enable or disable the red LED for normal
operation and wake up.
Enabled
LEDAmber Enabled
Disabled
Enable or disable the amber LED for
normal operation and wake up.
Enabled
ScanLED Enabled
Disabled
Enable or disable the LEDs that illuminate
while the laser scanner is active.
Enabled
Low Battery
Indication and
Performance
0 = Disable low
battery indication
and performance
1 = Disable low
battery indication,
enable
performance
2 = Enable low
battery indication,
disable
performance
3 = Enable low
battery indication
and performance
See
Table 2-1
for a description of low
battery indications for this parameter.
3 = Enable low battery
indication and
performance
Protect Toggle 0 = Disable
1 = Enable
See
Table 2-1
under Toggle Data
Protection. Enable or disable the ability to
toggle the Data Protection feature on and
off.
Disable
Table 1-1
Config.ini File Content (Continued)
Parameter Values Description Default