Instructions

Getting Started 1 - 13
7. Click Finish. In order to complete the pairing, open a serial input application such as HyperTerminal. The
CS3070 issues a two-tone beep and the Bluetooth button blinks slowly to indicate that the scanner paired
with the host.
Windows Mobile Device (ES400) HID Pairing Example
To pair to a ES400 Windows Mobile 6.5 device via HID:
1. Press the scan button (+) to wake the scanner.
2. Press and hold the Bluetooth button (round button with logo) for five seconds. The scanner beeps and the
Bluetooth button starts blinking quickly to indicate that the scanner is discoverable by the ES400.
3. On the ES400, launch the third party Bluetooth pairing application. Following is a sample window of such
an application.
Figure 1-16 Sample Bluetooth Application - Add Device Window
NOTE Bluetooth pairing suspends temporarily while charging via a USB cable. Disconnecting the cable
automatically re-establishes the Bluetooth pairing.
NOTE HID is the default profile for the CS3070. If this was changed, scan Bluetooth HID Profile on page 3-13.