Instructions

4 - 48 CS3000 Series Scanner Product Reference Guide
Convert GS1 DataBar to UPC/EAN
Parameter # 0xF0 0x8D
This parameter only applies to GS1 DataBar Omnidirectional and GS1 DataBar Limited symbols. Enable this
conversion to strip the leading
010 from GS1 DataBar Omnidirectional and GS1 DataBar Limited symbols
encoding a single zero as the first digit, and report the bar code as EAN-13.
For bar codes beginning with two or more zeros but not six zeros, this conversion strips the leading
0100 and
reports the bar code as UPC-A. The UPC-A Preamble parameter to transmit the system character and country
code applies to converted bar codes. Note that neither the system character nor the check digit can be
stripped.
Enable Convert GS1 DataBar to UPC/EAN
*Disable Convert GS1 DataBar to UPC/EAN