Reference Guide

Data Capture
20
Five long low beeps Red Conversion or format error.
None Red (fast blink)) on
trigger press
Scanner is disabled by a host command to the
scanner.
Wireless Operation
Low, high, low, high Red Out of batch storage memory, unable to store new
barcode.
Radio Indications
Low None Scanner inserted into a cradle (may be disabled).
Low, high Green Bluetooth connection established.
High, low Red Bluetooth disconnection event.
Long low, long high Red Bluetooth page timeout; remote device is out of
range/not powered.
Long low, long high, long
low, long high
None Bluetooth connection attempt was rejected by remote
device.
None Green (fast blink) Bluetooth attempting reconnection.
Five high None Bluetooth attempting reconnection (default is
disable).
Six high Blue (fast/fast/slow) Paging state indication.
Parameter Programming
Long low/long high beeps Red Input error, incorrect barcode or Cancel scanned,
wrong entry, incorrect barcode programming
sequence; remain in program mode.
High/low beeps Green Keyboard parameter selected. Enter value using
barcode keypad.
High/low/high/low beeps Green Successful program exit with change in the parameter
setting.
ADF Programming
Low/high/low beeps None ADF transmit error.
High/low beeps Green Number expected. Enter another digit. Add leading
zeros to the front if necessary.
Low/low beeps Green Alpha expected. Enter another alphabetic character
or scan the End of Message barcode.
High/high beeps Green blinking ADF criteria or action is expected. Enter another
criteria or action or scan the Save Rule barcode.
High/low/low beeps Green All criteria or actions cleared for current rule, continue
entering rule.
Table 5 Digital Scanner Beeper and LED Indications (Continued)
Beeper Sequence LED Indication
guide-user-color-8.5x11.book Page 20 Monday, June 1, 2020 5:43 PM
Draft v 10