Specifications

Device Manager
KR403 Specific User Interface
54
P1014152-002 Rev. A ZPL & CPCL Printer Driver for OPOS Application Programmer’s Guide 06/13/2011
Current Page:
Retract upon Timeout – If a label is not taken, you can define a timeout value when
expired will retract the current page. Retract timeout can be defined from 0 – 300 seconds.
Clear Presenter – Will eject the current page before printing a new page.
Kiosk Values:
Uncut Amount – When a partial cut is made by the printer, the media left uncut can be
defined from 10 to 60mm.
Cut Margin – This setting determines the margin between the cutter and the printhead. It is
defined from 2 to 9mm. The default is 9mm.
Presenter Loop Length – Determines the length of the presenter loop. It is defined from 3
to 1023mm. The default gives a loop of approximately 400mm.
With this feature, we build a loop with the imaged receipt and keep the printout in the printer
to prevent the kiosk user from taking the receipt while it is still being imaged. When the full
receipt is imaged, we cut the receipt and present a portion of the receipt to the user for them to
take. This reduces jamming and print image distortion of the receipt.
Present Length – Determines the amount of media to eject the page through the presenter
module.
When the customer takes the receipt, the printer detects a movement and issues the rest of the
receipt at 300 mm/s to help ensure receipt is removed undamaged. Value range from 0 to
255mm.
Kiosk Wall Compensation – By default, the printer will eject the paper 50 mm during a
present cycle. The kiosk wall compensation setting allows the user to increase the distance that
media is ejected during a present cycle. The additional distance can range from 0 to 255 mm.