Specifications

Device Manager
Additional Font Handling
48
P1014152-002 Rev. A ZPL & CPCL Printer Driver for OPOS Application Programmer’s Guide 06/13/2011
7. The new font should now be listed.
Assigning Multiple Fonts
1. In order to assign multiple fonts, repeat the steps in Adding a New Font in Device
Manager on page 45 for every font you want to add.
Note • When using One Shot ESC commands, the index entry for the font will be assigned
by the Device Manager to the next available font slot.
Note • 0, 1, 2 are built-in ZPL fonts and any new font will be assigned a following number,
e.g., 3 for “Mono1” if it was loaded before “TT0003M_” and 4 for “TT0003M_” if this font
was loaded after “Mono1”.