Specifications

Device Manager

Using the Device Manager

P1014152-002 Rev. A ZPL & CPCL Printer Driver for OPOS Application Programmer’s Guide 06/13/2011

Using the Device Manager

Use the Zebra OPOS Device Manager v1.0 to add a printer. First, make a cable or wireless

connection to a supported printer with one of the following:

•Bluetooth

• IP/WiFi

• Parallel

•Serial

•USB

To connect to a supported printer, perform the following steps:

1. To run the Device Manager from the "Start" button on the PC, go to All Programs/Zebra

Technologies/Zebra OPOS/Zebra OPOS Device Manager.

2. When the program displays, click on the "Add" icon. The General tab is used to add a

printer by selecting the printer model using the drop-down menu.

A logical device name for the printer must be defined, as this name will be used by the

OPOS application.