Installation guide

18 -- Using the Zebra Printer with MSP
The ZebraTkipPolicy needs to be activated. Once activated, the Zebra Printers will receive the
ZebraTkipPkg package and the TKIP WLAN setting will be applied via the Windows PC Client
and the Zebra Printer MSP Proxy Plug-In.Chapter 5 – Using Zebra Printer Management Support
How to use the Zebra Printer Management
Support
A Zebra Printer is managed via a Windows PC on which the MSP Windows PC Client and Zebra
Printer MSP Proxy Plug-In are installed. The Zebra Printer will be treated by MSP as a managed
device with the Device Class “Zebra Printer”. The following MSP support will be provided for
managed Zebra Printers:
Provisioning Support
Since Zebra Printers can’t run any form of general (e.g., user developed application) software, no
support is provided for Provisioning Packages containing general software from MSP to managed
Zebra Printers.
Since the firmware on Zebra Printers can be updated, support is provided to update the firmware
on managed Zebra Printers by Provisioning Packages from MSP.
The contents of the MSP package will be downloaded via WLAN once they are delivered to the
MSP Zebra Printer MSP Proxy Plug-In.
The results of packages provisioned will be sent back to the MSP Server. The results will either
be success or failure. An example for each is depicted below. A result of 0 indicates success.
Anything other than zero will indicate failure along with log information to provide more details
regarding the error.
0502
Run
Job
Failed
Action
577BACKLIGHT
LOG
7-8-2011-15:20:44.31 - Settings
line error for line
set:display.backlight=on
COMPLETE 070811152111 -
824
10481
Run
Job
Completed
Action
ZebraFWSHSTZ11Z27
COMPLETE
070111104340
0
Add
Note
Device Attribute Support
MSP receives certain Device Attributes from the MSP Windows PC Client for managed Zebra
printers. The following Device Attributes are supported:
agent.feature
This Device Attribute indicates which feature is supported. Values are Provision or Control