Specifications

Mobile Printing Systems CPCL Programming Manual
Section 14
Configuration/
Control
Commands
pg. 14-229
continued
internal_wired.ip.timeout.value
type: getvar; setvar
This parameter refers to the time (in seconds) before the connection times out for the internal wired print
server. For this to take effect, the print server must be reset.
getvar result The time (in seconds) until the connection times out.
Example
Description
Instructs the printer to respond with the time (in seconds) of the
internal wired print server before the connection times out.
Syntax ! U1 getvar ”internal_wired.ip.timeout.value”
Result “300“
setvar choices
Values: “1” through “3600”
Default “300”
Example
Description
Instructs the printer to set the time (in seconds) of the internal
wired print server before the connection times out.
Syntax ! U1 setvar “internal_wired.ip.timeout.value” “300”