Specifications

Mobile Printing Systems CPCL Programming Manual
Section 14
Configuration/
Control
Commands
pg. 14-153
continued
wlan.roam.interval
type: getvar; setvar
This parameter refers to specifying the wireless roam interval.
getvar result Specified wireless roam interval
Example
Description Gets specified roam interval
Syntax ! U1 getvar “wlan.roam.interval”
Result “20”
setvar choices
Values: decimal values between 5 and 255 inclusive
Default “20”
Example
Description Sets wireless roam interval
Syntax ! U1 setvar “wlan.roam.intervall” “20”
wlan.roam.interchannel_delay
type: getvar; setvar
This parameter sets how long of a delay before scanning the next channel when roaming.
getvar result Set delay time before scanning
Example
Description Gets current set delay time before scanning the next channel
when roaming
Syntax ! U1 getvar “wlan.roam.interchannel_delay”
Result “400”
setvar choices
Values: 10 to 3000
Default “400”
Example
Description Sets delay time before scanning the next channel when
roaming
Syntax ! U1 setvar “wlan.roam.interchannel_delay” “400”