Specifications

Mobile Printing Systems CPCL Programming Manual
Section 14
Configuration/
Control
Commands
pg. 14-145
continued
wlan.leap_password
type: getvar; setvar
This parameter refers to the LEAP password. The password must correspond to a user profile
established on the RADIUS/AAA server in use.
This parameter is not supported on units with a Frequency Hopping Spread Spectrum (FHSS) radio.
getvar result Returns the LEAP password.
Example
Description Instructs the printer to respond with the LEAP password
Syntax ! U1 getvar “wlan.leap_password”
Result “password”
setvar choices
4-32 ASCII characters
Default “password”
Example
Description Instructs the printer to set the LEAP password to “password”
Syntax ! U1 setvar “wlan.leap_password” “password”
Result The LEAP password will be set to “password”