Specifications

Mobile Printing Systems CPCL Programming Manual
Section 14
Configuration/
Control
Commands
pg. 14-132
continued
ip.telnet.enable
type: getvar; setvar
This parameter refers to the TELNET protocol.
getvar result Returns the TELNET protocol status. (on or off)
Example
Description Instructs the printer to respond with the TELNET setting
Syntax ! U1 getvar “ip.telnet.enable”
Result “on”
setvar choices
“on”, “off”
Default “on”
Example
Description Instructs the printer to enable the TELNET protocol
Syntax ! U1 setvar “ip.telnet.enable” “on”
Result The TELNET protocol will be turned on upon cycling the power
or issuing the device.reset
ip.udp.enable
type: getvar ;setvar
This parameter refers to the UDP socket protocol.
getvar result Returns the UDP protocol status. (on or off)
Example
Description This command instructs the printer to respond with the UDP
setting
Syntax ! U1 getvar “ip.udp.enable”
Result “on”
setvar choices
“on”, “off”
Default “on”
Example
Description This command instructs the printer toenable the UDP protocol
Syntax ! U1 setvar “ip.UDP.enable” “on”
Result The UDP protocol will be turned on upon cycling the power or
issuing the device.reset