Specifications

Mobile Printing Systems CPCL Programming Manual
Section 14
Configuration/
Control
Commands
pg. 14-122
continued
ip.pop3.username
type: getvar; setvar
This parameter refers to the POP3 username. This only applies if the ip.pop3.enable is set to on.
getvar result This command instructs the printer to respond with the POP3 username value.
Example
Description This command instructs the printer to respond with the
POP3 username value
Syntax ! U1 getvar “ip.pop3.username”
Result “user”
setvar choices
Text string up to 19 characters in length
Default User
Example
Description This command instructs the printer to change the POP3
username to user1
Syntax
! U1 setvar “ip.pop3.username” “user1”
Result This will change the pop3 username to user1