Specifications

Mobile Printing Systems CPCL Programming Manual
Section 14
Configuration/
Control
Commands
pg. 14-87
continued
ip.ftp.enable
type: getvar; setvar
This parameter refers to the FTP protocol setting. It tells the printer to turn FTP on or off.
getvar result Returns printer’s FTP status (on or off)
Example
Description This command instructs the printer to respond with the FTP
setting
Syntax ! U1 getvar “ip.ftp.enable”
Result “on”
setvar choices
“on”, “off”
Default “on”
Example
Description This command instructs the printer to disable FTP
Syntax ! U1 setvar “ip.ftp.enable” “off”
Result FTP service will be disabled upon cycling the power or issuing
the device.reset command