Specifications
Mobile Printing Systems
CPCL Programming Manual
Section 14
Configuration/
Control
Commands
pg. 14-54
continued
Manager to a networked PC.
When setup is complete, start the Agent, and open the Console Manager GUI by double clicking the
appropriate icons.
Connect the Console Manager to the Avalanche Agent. (The Agent IP should be the local host IP,
127.0.0.1).
Once connected to the local Agent, expand the tree view on the left and delete all entries under the
Serial Ports section by right clicking on each and selecting Delete.
Printer Conguration for use with Wavelink Avalanche
In order for the mobile printers to successfully become part of an existing Avalanche system, that
system must first be set up and configured properly. It is recommended you refer to the latest version
of the Network Configuration Guide (available on-line at www.zebra.com) for more information on
configuring your system for use with Avalanche.
Troubleshooting Avalanche Issues
To troubleshoot unit use the “netmanage” GETVAR parameters (detailed below) as troubleshooting
tools:
“netmanage.status_code”
“netmanage.state_code”
“netmanage.error_code”
Status Codes:
To obtain the device’s status code use:
! U1 getvar “netmanage.status_code”
One of the following status codes will be returned:
0 OK
1 Error, check State and Error codes.