Specifications
Mobile Printing Systems
CPCL Programming Manual
Section 14
Configuration/
Control
Commands
pg. 14-20
continued
comm.stop_bits
type: getvar; setvar
This parameter refers to the printer’s comm. port stop bits.
Note: Once the printer’s comm. port parameters have been changed, the host terminal must also be congured to match the new printer settings before
the host can communicate again
getvar result Stop bits.
Example
Description Get printer’s comm. port stop bits
Syntax ! U1 getvar “comm.stop_bits”
Result “1”
setvar choices
“1”, “2”
Default “1”
Example
Description Set printer’s comm. port stop bits to 1
Syntax ! U1 setvar “comm.stop_bits” “1”
Result Printer will configure the comm.port for 1 stop bit