Specifications
Mobile Printing Systems
CPCL Programming Manual
Section 14
Configuration/
Control
Commands
pg. 14-19
continued
comm.baud
type: getvar; setvar
This parameter refers to the printer’s comm (cable) baud rate.
Note: Once the printer’s comm. port parameters have been changed, the host terminal must also be congured to match the new
printer settings before the host can communicate again
getvar result Printer baud rate.
Example
Description Get printer’s comm. port baud rate
Syntax ! U1 getvar “comm.baud”
Result “19200”
setvar choices
“9600”, “19200”, “38400”, “57600”, “115200”
Default “19200”
Example
Description Set printer’s comm. baud rate to 19200 BPS.
Syntax ! U1 setvar “comm.baud” “19200”
Result
Printer will change its comm. baud rate to 19200
BPS