User`s manual

want and then click select. It will bring you back to the ZebraPrintUtility
window.
9) Tap on the Send/Print button and the label will print.
E. Printing Labels Using the iPAQ 3870 with embedded Bluetooth.
In order to print labels from the iPAQ 3870 (with embedded Bluetooth) the user
needs to establish a link from the IPAQ to the printer. In addition he needs to
download the files: ZebraBTPrintUtility.exe and pwrdll.dll (compiled for the ARM
processor) into the iPAQ and a few label files to print. (Labels are files that have
the .lbl extension)
All the files should have been provided with this document. If you don’t have
these files, download them from Zebra website or contact customer support to
obtain them. Make sure you use the files compiled for the ARM processor since
the iPAQ uses the ARM processor.
With the help of Microsoft Active Sync, Copy the ZebraBTPrintUtilityARM.exe in
the windows\Start folder of the IPAQ and the pwrdll.dll in the windows folder of
the IPAQ. Also copy the sample labels in My device/ My Documents/ Business
folder of the IPAQ.
To establish a link, turn the Zebra BT printer ON, click the Bluetooth icon in the
bottom status bar of the screen and click on “Bluetooth Manager”. Note at the
time that these instructions were written, the IPAQ 3870 has the “Bluetooth
Security Manager Version 1.0.12 (SP1)”. Make sure the time out on the printer
is set to at least 1200 seconds. Time out in Zebra BT printers by default is set to
1200 seconds, but if it needs to be changed please consult the printer user's
manual.
1) Click the Bluetooth Manager sign on the bottom task bar in the iPAQ
2) Make sure the radio is turn on by selecting "Turn radio on"
3) On Bluetooth Manager, Click on "search" to find the Zebra BT printer (The
printer must be turned on to be discovered)
4) Select the box next to the device found and click "save"
5) Save the device in the "all devices" group and click OK
6) Click OK to get out of this screen
7) A screen showing the Zebra device with the status "available" should be
shown. If you only see icons go to “view” and select list.
8) Select the device by clicking on it and a service discovery routine will run
9) click on "Actions" at the bottom task bar
10) click on "connect to modem" and then OK. The screen with the BT printer
should show under the status bar "connected"
Rev 2.1 Page 12