User`s manual
3) Check the box next to the printer name and tap next. The service that the
printer provides is found. Click finish.
4) Click “Device” in the lower menu bar, and then click on “My Bluetooth
Device”. Go to the COM Ports tab. Make sure that the box for Bluetooth
Com Port is selected and write down the port number. If you are unable to
select the box for “Bluetooth COM Port” then de-select some of the other
boxes and then select the “Bluetooth COM Port Box”. Only 4 boxes can
be selected at any given time. Then click OK to return to the device
name screen.
5) Tap on the upper most bar of the screen to bring the start menu up, and
select “ZebraPrintUtilityBT”.
6) Make sure that the Serial Port box has COMX: where X represents the
COM port that Socket Communications assigned to the “Bluetooth COM
Port” and you wrote down in step 4 above
7) Click on “file name” and select a previously saved label in the Business
folder of your PPC.
8) Tap on “open port”. This will bring you to a screen where you can select
the Zebra printer previously discovered. Tap on the printer you want and
then click select. It will bring you back to the ZebraPrintUtility window.
9) Tap on the Send/Print button and the label will print.
D. Printing Labels Using the brainboxes Bluetooth CF card in your PPC
device.
1) Once the BT software is installed in the PPC terminal, click on the BT
icon on the bottom of the screen and then on the Bluetooth Manager
link.
2) You will be on the Bluetooth “My shortcuts” screen. Click on the bottom
BT icon on the bottom of the screen again. Select Explore a Bluetooth
device and tap next. You can also get here by selecting “New” and
then connect.
3) Tap on the selection box “Select a Bluetooth device” to discover the
printer. A list of discovered devices will come up.
4) Follow the screen directions to discover the services provided by the
printer. Modem will come up. Select modem and tap finish.
5) Tap on the top Start menu bar to select “ZebraPrintutilityBT”
6) Change the Serial Port to COM 4: since the brainboxes card uses
COM port 4.
7) Click on “file name” and select a previously saved label in the Business
folder of your PPC.
8) Tap on “open port”. This will bring you to a screen where you can
select the Zebra printer previously discovered. Tap on the printer you
Rev 2.1 Page 11