User`s manual

B. Printing Labels Using the Anycom CF card in your PPC device.
1) Tap on Start / Programs / Bluetooth Wizard /in your PPC device.
2) Tap on Serial Port Connection and then tap next.
3) Follow the directions on the screen. – Select a local port to setup or click new
to create a new virtual port - If you select an existing COM port tap on it and then
click next. Other wise add a new port and then tap on it and then click “next”.
4) Again continue following the directions on the screen – Tap “search again”,
then OK to the message warning you to start the printer (you must start the
printer at this point if it is not “on” already). The software will discover the printer
and its services, which will be described as “modem” in the PPC screen.
5) Select the Zebra Printer showed in the screen and then click next.
6) Click Finish and it will take you to the home-Bluetooth Wizard screen- Close
the wizard.
7) Tap the upper bar on the screen of the PPC device and select
“ZebraBTPrintUtility” from the drop down “start menu”.
8) Using the pop-up keyboard, change the name of the Serial Port to match the
serial port that you selected in the Anycom Bluetooth Wizard. A message
saying, “port was changed” will come up. Click OK.
9) Tap file name and select one of the labels that you previously copied to the
business folder.
10) Tap “open port” and then tap “send/print file”. After a few seconds the label
will be printed.
C. Printing Labels Using the “Socket communications” CF card in your
PPC device
These instructions are written for Socket Device Manager, version 2.0-00 Drakar
Bluetooth Stack version 1.3.0.5
Discover Zebra BT printer by doing the following:
1) After your PPC has been turn on and the Socket BT card has initialized, a
BT icon will come up at the bottom of the screen. Tap on it and go to
advanced features / Bluetooth devices.
You can also access this program by using the file explorer function to
locate the Bluetooth devices folder in your PPC.
2) Click on the set of eyes icon and follow the device discovery wizard, by
clicking “next” twice. The Zebra printer will be discovered with its serial
number as part of its name. Device class will be “printer”.
Rev 2.1 Page 10