Datasheet
SPECIFICATION SHEET
AP 8232
TECHNICAL SPECIFICATIONS
Part number: SS-AP8232. Printed in USA 01/14.
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks
or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their
respective owners. © Motorola Solutions, Inc. 2014. All rights reserved
802.11AC CAPABILITIES
• 3X3 MIMO with 3 Spatial Streams
• 20,40and80MHzChannels
• 1.3Gbpsdataratesonthe802.11acradio
• PacketAggregation(AMSDU,AMPDU)
• ReducedInterfaceSpacing
• 802.11DFS
• MIMOPowerSave(StaticandDynamic)
• Advancedforwarderrorcorrectioncoding:STBC,LDPC
PHYSICAL CHARACTERISTICS
Dimensions 9.0 in. L x 6.0 in. W x 1.77 in. H
230 mm L x 153 mm W x 45 mm H
Weight 3.3 lbs/1.5 kg
Housing Metal, plenum-rated housing (UL2043)
Available mounting No additional hardware required to mount
Configurations Above drop ceiling, under ceiling or on wall
LEDs activity
indication
2 top mounted LEDs, 2 bottom mounted LEDs
Uplink 2 ports (GE1, GE2) Auto-sensing
10/100/1000Base-T Ethernet; 802.3at on
GE1 LAN port
Antenna
connectors
Six RP-SMAs
Console port RJ45 Console Port
USER ENVIRONMENT
Operating Temp. 32° F to 122° F/0° C to 50° C
Storage Temp. -40° F to 185° F/-40° C to 85° C
Operating humidity 5 to 95% RH non-condensing
Electrostatic
discharge
15kV air, 8kV contact
POWER SPECIFICATIONS
Operating voltage 48V
Operating current 310mA or 520mA
Integrated PoE
support
802.3af and 802.3at
Aux power supply 30W (625mA@48V) DC auxiliary power supply
EXPANSION MODULES
Intrusion detection MOD-8132-6001S-WW
Light sensor MOD-8XXX-0001E-WW
4G LTE backhaul Sierra Wireless 313U
NETWORKING SPECIFICATIONS
Layer 2 and Layer 3 Layer 3 routing, 802.1q, DynDNS, DHCP server/
client, BOOTP client, PPPoE, and LLDP
Security Stateful Firewall, IP filtering, NAT, 802.1x,
802.11i, WPA2, WPA Triple-Methodology
Rogue Detection: 24x7 dual-band WIPS
sensing, MU-assisted, on-board IDS and
secure guest access (hotspot)
Quality of
Service (QoS)
WMM, WMM-UAPSD, 802.1p,
Diffserv and TOS
RADIO SPECIFICATIONS
Wireless medium Direct Sequence Spread Spectrum (DSSS),
Orthogonal Frequency Division Multiplexing
(OFDM) and Spatial multiplexing (MIMO)
Network standards IEEE 802.11a/b/g/n/ac, 802.11d and 802.11i
WPA2, WMM and WMM-UAPSD
Data rates
supported
802.11b/g: 1,2,5.5,11,6,9,12,18,24,36,48, and 54Mbps
802.11a: 6,9,12,18,24,36,48, and 54Mbps
802.11n: MCS 0-23 up to 450Mbps
802.11ac: MCS 0-9 up to 1.3Gbps
Operating channels 2.4GHz band: channel 1 through channel 13
5.2GHz band: channel 36 through channel 165
* channel availability depends on local
regulatory restriction
Antenna
configuration
3x3 MIMO (transmit/receive on all three
antennas)
and green mode (dynamical antenna selection)
Transmit power
adjustment
1dB increment from 0dBm to max
Operating
frequencies
2412 to 2472 MHz, 5180 to 5825 MHz
REGULATORY
Product safety
certifications
UL / cUL 60950-1, IEC / EN60950-1, UL2043, RoHS
Radio approvals FCC (USA), EU, TELEC